Enabling Ieee 802.1X Authentication - Ricoh Printer Quick Installation Manual

• "Printing the Test Page", Quick Installation Guide.

Enabling IEEE 802.1X Authentication

Follow this procedure to enable IEEE 802.1X Authentication.
• To use IEEE 802.1X Authentication, connect this machine to an authentication enabled port. If you
do not, the authentication will fail.
1. Press the [Menu] key.
The [Menu] screen appears.
2. Press the [ ] or [ ] key to display [Host Interface], and then press the [
3. Press the [ ] or [ ] key to display [Network Setup], and then press the [
4. Press the [ ] or [ ] key to display [IEEE802.1X Auth], and then press the [
BMU098S
Ethernet Configuration
4
Enter] key.
Enter] key.
Enter] key.
69