Executing The Installation Shell Script - Ricoh Printer Quick Installation Manual

UNIX Configuration

Executing the Installation Shell Script

Having configured the printer IP address, follow the procedure below to execute
the installation shell script and set up the workstation printing environment.
1
Important
❒ Before executing the installation shell script, the IP address, host name and
printer name are required.
❒ The following procedures use the sample IP address: 192.168.15.16; sample
host name: nphost; and sample printer name: np.
❒ Download the installation shell script from our Web site. Keep the installation
shell script as local folders.
A
Move to the directory that has kept the installation shell script.
B
Run the installation shell script.
# sh ./install
Insert a period and slash before the current directory.
C
Enter a number to select the workstation operating system that you are us-
ing.
Network printer install shell
Select your workstation OS type
1.SunOS 4.x.x
2.Solaris 2.x, Solaris 7-9 (SunOS5.x)
3.HP-UX
4.UnixWare
5.Linux
6.OpenServer
7.Quit
Enter <1-7>:
2
If you select "7", the installation shell script ends.
D
Enter the printer's IP address.
Enter Printer host IP address <xxx.xxx.xxx.xxx> [re-
turn=skip]:
192.168.15.16
If the host name of the printer has already been configured, press the {RE-
TURN} ( {ENTER} ) key. Nothing will be added to the /etc/hosts file.
E
Enter the printer's host name.
Enter Printer host name : nphost
If no IP address was entered in step
6
D
, nothing is added to the /etc/hosts file.