Ricoh Printer Quick Installation Manual page 176

8. Adjusting the Printer
6. Confirm the position of the image on the test sheet, and then adjust the registration value.
In this setting, adjust the margins of the test sheet so that they are equal in size.
7. In the [Registration] menu, press the [ ] or [ ] key to select [Adjustment], and then press
the [ Enter] key.
8. Press the [ ] or [ ] key to select the parameter you want to adjust, and then press the [
Enter] key.
8
9. Press the [ ] or [ ] key to set the registration value (mm), and then press the [
Increase the value to shift the print area in the positive direction, and decrease to shift in the negative
direction.
Pressing the [ ] or [ ] key makes the value increase or decrease by 0.1 mm steps.
158
BMU311S
BMU310S
Enter] key.