Slp; Smb - Ricoh Printer Quick Installation Manual

Hide thumbs Also See for Printer:

Table of Contents

View settings

• If "-p" is added, you can view settings one by one.

• For details about the information displayed, see "Understanding the Displayed Information".

• p.265 "Understanding the Displayed Information"

slp

Use "slp" command to view and configure SLP settings.

msh> slp ttl "ttl_val"

• You can search the NetWare server using SLP in the PureIP environment of NetWare 5/5.1 and

Netware 6/6.5. Using the "slp" command, you can configure the value of TTL which can be used by

SLP multicast packet.

• The default value of TTL is 1. A search is executed only within a local segment. If the router does not

support multicast, the settings are not available even if the TTL value is increased.

• The acceptable TTL value is between 1 and 255.

Use the "smb" command to configure or delete the computer or workgroup name for SMB.

Computer Name settings

msh> smb comp "computer name"

• Set computer name using up to 15 characters. Names beginning with "RNP" or "rnp" cannot be

Working Group Name settings

msh> smb group "work group name"

• Set workgroup name using up to 15 characters.

Comment settings

msh> smb comment "comment"

• Set comment using up to 31 characters.

Notify print job completion

msh> smb notif {on | off}

Remote Maintenance by telnet

Table of Contents