Ipp; Ipv6 - Ricoh Printer Quick Installation Manual

5. Monitoring and Configuring the Printer

ipp

Use the "ipp" command to view and configure IPP settings.
Viewing settings
The following command displays the current IPP settings:
msh> ipp
IPP timeout configuration
Specify how many seconds the computer waits before canceling an interrupted print job. The time
can be entered between 30 to 65535 seconds.
msh> ipp timeout [30 - 65535]
IPP user authorization configuration
Use IPP user authorization to restrict users to print with IPP. The default is "off".
5
msh> ipp auth {basic|digest|off}
• User authorization settings are "basic" and "digest".
• Use "off" to remove a user's authorization.
• If user authorization is specified, register a user name. You can register up to 10 users.
IPP user configuration
Configure IPP users according to the following messages:
msh> ipp user
The following message appears:
msh> Input user number (1 to 10):
Enter the number, user name, and password.
msh> IPP user name:user1
msh> IPP password:*******
After configuring the settings, the following message appears:
User configuration changed.

ipv6

Use the "ipv6" command to display and configure IPv6 settings.
View setting
msh> ipv6
IPv6 stateless address
msh> ipv6 stateless {on|off}
234