Setting The Ssl / Tls Encryption Mode - Ricoh Printer Quick Installation Manual

Hide thumbs Also See for Printer:

Table of Contents

Install the certificate by following the Certificate Import Wizard instructions.

• For details about how to install the certificate and about where to store the certificate when accessing

the machine using IPP, see Web Image Monitor Help.

• If a certificate issued by a certificate authority is installed in the machine, confirm the certificate store

location with the certificate authority.

Setting the SSL / TLS Encryption Mode

By specifying the SSL/TLS encrypted communication mode, you can change the security level.

Encrypted Communication Mode

Using the encrypted communication mode, you can specify encrypted communication.

Ciphertext Only

Ciphertext Priority

Ciphertext/Cleartext

Setting the SSL / TLS encryption mode

This can be specified by the administrator.

After installing the device certificate, specify the SSL/TLS encrypted communication mode. By making this

setting, you can change the security level. Specify the SSL/TLS encrypted communication mode using Web

Image Monitor.

Log on to Web Image Monitor in the administrator mode.

Click [Configuration].

Click [SSL/TLS] in the "Security" area.

Select the encryption communication mode in the "Permit SSL/TLS Communication" list, and

then click [OK].

Select [Ciphertext Only], [Ciphertext Priority], or [Ciphertext/Cleartext] as the encrypted

communication mode.

Allows encrypted communication only.

If encryption is not possible, the machine does

not communicate.

Performs encrypted communication if encryption

is possible.

If encryption is not possible, the machine

communicates without it.

Communicates with or without encryption,

according to the setting.

Protection Using Encryption

Table of Contents