Ricoh Printer Quick Installation Manual page 672

Hide thumbs Also See for Printer:

Table of Contents

Replace Maintenance Kit

Pull the toner cartridge out of the

printer, while raising the front side.

❒ Be sure to put the used cartridge

down on a level surface.

To avoid dirtying your hands with

toner from the transfer roller, wear

the gloves included in the mainte-

Hold the lock levers (green parts),

and then pull them.

Hold the green parts of the roller

on both sides, and then remove

the roller from the printer, as

shown in the illustration.

Insert the new transfer roller on

the socket with the gear of the

roller positioned to the left.

❒ Do not insert the roller on the

back of the socket. Doing so can

damage the printer.

❒ Insert the metallic part of the

roller on the socket. If you insert

the sponge part of the roller, the

roller might be damaged.

Push the lock levers both ends of

the printer as shown in the illus-

tration, until they click into place.

❒ When the transfer roller is set,

the transfer roller cover will re-

turn to its original position au-

tomatically.

Chapters

Table of Contents