Ricoh Printer Quick Installation Manual page 402

4. Making Printer Settings Using the Control Panel
•
SSID
You can set an SSID in the infrastructure mode and the 802.11 Ad hoc mode.
• View
• Enter ID
4
• Default: blank (ASSID)
• Select [?] to enter [/] for the SSID. Also, [¥] appears when printing the configuration page,
read it as [/].
• Characters used are ASCII 0x20-0x7e (32 bytes).
• An SSID is set automatically to the nearest access point if no SSID has been set.
• If no SSID has been set for the 802.11 ad hoc mode, an SSID is set automatically and the
same SSID is used for the 802.11 ad hoc mode and the infrastructure mode.
• If blank is specified in SSID for 802.11b adhoc mode or adhoc mode, "ASSID" appears.
• An SSID can also be set using Web Image Monitor. For details, see Web Image Monitor
Help.
Security Method
You can enable or disable encryption. You can also specify the security type when the encryption
is enabled.
• None
• WEP
• WPA
Encrypt. Meth.
Authent. Meth.
164
1-13, 36, 40, 44, 48
1-11, 36, 40, 44, 48
Default: 11
• Change (HEX): Enter the WEP key using a hexadecimal number sequence. When
using 64 bit WEP, enter 10 ASCII characters. When using 128 bit WEP, enter 26
ASCII characters.
• Change (ASCII): Enter the WEP key using an ASCII character sequence. When using
64 bit WEP, enter 5 ASCII characters. When using 128 bit WEP, enter 13 ASCII
characters.
• CCMP(AES)
• TKIP