Host Interface Menu Parameters - Ricoh Printer Quick Installation Manual

Wait two seconds. The [I/O Timeout] menu appears.
5. Press the [Menu] key.
The initial screen appears.

Host Interface Menu Parameters

This section explains parameters that can be set on the Host Interface menu.
I/O Buffer
You can select the size of I/O Buffer. Normally it is not necessary to change this setting.
• 128 KB
• 256 KB
• Default: 128 KB
I/O Timeout
You can set how many seconds the printer should wait before ending a print job. If printing operation
is frequently interrupted by data from other ports, you can increase the timeout period.
• 10 seconds
• 15 seconds
• 20 seconds
• 25 seconds
• 60 seconds
• Default: 15 seconds
Network Setup
You can make network-related settings.
• For details about, see "Configuration", Hardware Guide.
IPv4 Settings
You can select whether to set the IPv4 address automatically or manually.
• DHCP
On/Off (Default: On)
• IPv4 Address
You can specify the IPv4 address.
Host Interface Menu
4
159