Cleaning The Friction Pad - Ricoh Printer Quick Installation Manual

Hide thumbs Also See for Printer:

Table of Contents

7. Cleaning the Printer

Cleaning the Friction Pad

If the friction pad is dirty, a multi-feed or a misfeed might occur. In this case, clean the pad as follows:

• Do not use chemical cleaner or organic solvent such as thinner or benzine.

• Do not slide the paper tray in with force. If you do, the front and side guides might move.

Pull out the paper tray until it stops.

Lift the front side of the tray, and then pull it out of the printer.

Place the tray on a flat surface. When there is paper in the tray, remove paper.

Table of Contents