Buell 2002 X1 Handbook page 249

Hide thumbs Also See for 2002 X1:

Table of Contents

Code 13 Test (Part 3 of 3)

Install original O2 sensor

and replace ECM

ELECTRONIC CONTROL

MODULE). Road test again

2002 Buell X1: Fuel System

Continued from

Code 13 Test (Part 2 of

Turn ignition OFF and reconnect O2 sensor. Turn ignition ON

and start engine. Allow engine to reach operating temperature.

Does voltage quickly flunctuate between 0.4-0.6 volts?

Check for intermittents by per-

Intermittents present?

Replace O2 sensor

as necessary.

(4.32 OXYGEN SEN-

SOR). Clear codes if

Scanalyzer is available

and road test. Did check

engine lamp come on

and set CODE 13?

Clear codes and conﬁrm proper

operation with no check engine

Code 13 Test (Part 2 of 3)

for diagnostic material.

Chapters

Table of Contents