Buell 2002 X1 Handbook page 128

HOME
WINDSCREEN
REMOVAL
1. See Figure 2-134. Remove two screws and nylon wash-
ers on each side.
2. If necessary, remove both windscreen brackets following
procedure under 2.16 FRONT
INSTALLATION
1. If removed, install both windscreen brackets. See
FRONT FORK.
2. Align windscreen on right and left brackets.
3. See Figure 2-134. Install two screws and nylon washers
on each side. Tighten securely.
2002 Buell X1: Chassis
FORK.
2.16
7060
Figure 2-134. Windscreen, Right Side
2.39
Screws and
Nylon Washers
2-81