Ratchets And Handles; Storage Units - Buell 2002 X1 Handbook

HOME

Ratchets and Handles

Periodically clean and lubricate ratchet mechanisms with
G
a light grade oil. Do not replace parts individually; ratch-
ets should be rebuilt with the entire contents of service
kit.
Never hammer or put a pipe extension on a ratchet or
G
handle for added leverage.
Always support the ratchet head when using socket
G
extensions, but do not put your hand on the head or you
may interfere with the action of its reversing mechanism.
When breaking loose a fastener, apply a small amount of
G
pressure as a test to be sure the ratchet's gear wheel is
engaged with the pawl.
Sockets
Never use hand sockets on power or impact wrenches.
G
Select the right size socket for the job.
G
Never cock any wrench or socket.
G
Select only impact sockets for use with air or electric
G
impact wrenches.
Replace sockets showing cracks or wear.
G
Keep sockets clean.
G
Always use approved eye protection when using power
G
or impact sockets.
1-4

Storage Units

Don't open more than one loaded drawer at a time.
G
Close each drawer before opening up another.
Close lids and lock drawers and doors before moving
G
storage units.
Don't pull on a tool cabinet; push it in front of you.
G
Set the brakes on the locking casters after the cabinet
G
has been rolled to your work.
2002 Buell X1: Maintenance