Reverb>Big Hall; Reverb>Studio - Akai DPS16 Operator's Manual

Chapter 13: Using the Effects
REVERB>BIG HALL
This stereo reverb effect simulates reverberations in a big hall.
Parameter
1 Pre-D *1
2
Time *2
3
Diff *3
4 HFdamp *4
5
Width *6
6 Balance
7 Effect
REVERB>STUDIO
This stereo reverb effect simulates reverberations in a recording studio.
Parameter
1
Pre-D *1
2 Time *2
3
Diff *3
4 HFdamp *4
5
Near *5
6
Width *6
7 Balance
8 Effect
170
Setting range
1ms – 100ms Adjusts the delay time of early reflections.
0.1sec – 10sec Adjusts the time of attenuation of reverberation.
0 – 127 Adjusts the density of reverberation.
20Hz – 20kHz Sets a frequency at which the higher range of reverberation is cut.
0 – 127 Adjusts the width and spread of the stereo image.
+50 – 0 – –50 Adjusts the balance between the effect sound and dry sound. (Effect
sound only at a value of +50)
ON/OFF Switches the effect sound output on and off.
Setting range
1ms – 100ms Adjusts the delay time of early reflections.
0.1sec – 10sec Adjusts the time of attenuation of reverberation.
0 – 127 Adjusts the density of reverberation.
20Hz – 20kHz Sets a frequency at which the higher range of reverberation is cut.
0 – 127 Adjusts the imaginary distance to the sound source. Lower the value is,
more depth and distance.
0 – 127 Adjusts the width and spread of the stereo image.
+50 – 0 – –50 Adjusts the balance between the effect sound and dry sound. (Effect
sound only at a value of +50)
ON/OFF Switches the effect sound output on and off.
1
2
3
4
5
6
7
Function
1
2
3
4
5
6
7
8
Function