Noise Gate; Digital Eq - Akai DPS16 Operator's Manual

NOISE GATE

This monaural effect mutes signals at a certain level (threshold) or lower. This is useful for cutting noise during
silent parts of a performance.
Parameter
1 Thresh *1 –60dB – 0dB
2
Key *2 AUX-1 – AUX-4
3 Output *3 –20dB – +20dB
4 Attack *4 0 – 127
5
Release *5 0 – 127
6 Hold *6 0 – 127
7
Link ON/OFF
8
Effect ON/BYPASS

DIGITAL EQ

This is a monaural, three-band parametric equalizer.
Parameter
1 Freq 1 *1 20Hz – 20kHz
2 Gain 1 *2 –18dB – +18dB
3 Freq 2 *3 20Hz – 20kHz
4
Gain 2 *4 –18dB – +18dB
5 Freq 3 *5 20Hz – 20kHz
6 Gain 3 *6 –18dB – +18dB
7 Output –60dB – +24dB
8 Effect ON/BYPASS
9
Q 1 – 3 0.5 – 10
Setting range
Adjusts the level at which the gate opens or closes.
Selects the source signal that triggers the gate to open or close (AUX
send 1–4).
Adjusts the level of the effect sound.
Adjusts the attack time of the effect.
Adjusts the release time of the effect.
Adjusts the hold time of the effect.
Selects whether or not the FX 1 (FX 3) settings are used by the FX 2 (FX 4)
parameters. (See "Link parameter" on page 174.)
Selects whether the effect is enabled (ON) or bypassed (BYPASS).
Setting range
Sets the center frequency for EQ1.
Adjusts the gain for EQ1.
Sets the center frequency for EQ2.
Adjusts the gain for EQ2.
Sets the center frequency for EQ3.
Adjusts the gain for EQ3.
Sets the level of the effect sound.
Selects whether the effect is enabled (ON) or bypassed (BYPASS).
Sets the Q for EQ1–3.
Chapter 13: Using the Effects
1
2
3
4
5
6
7
8
Function
1
2
3
4
5
6
7
8
9
Function
175