Q-Link Functions; Auto Punch Function; Sync/Clock Function - Akai DPS16 Operator's Manual

Chapter 9: Various Settings

Q-Link Functions

This section describes functions you can select from Q-Link Functions, and the parameters and operations
assigned to the

Auto Punch function

This function has parameters related to the Auto Punch In/Out function.
[F1] key/REPEAT parameter
This parameter enables you to set the Repeat function on or off. Pressing the
OFF . When this parameter is turned on, the DPS16 plays back data between the IN point and OUT point
(specified by the
[F2] key/REHEARSAL parameter
This parameter enables you to set the Rehearsal function on or off. Pressing the
and OFF . When this parameter is turned on, actual recording is not performed. Only the monitoring source
(input or track playback) is changed. (See page 52 for more information on the Rehearsal function.)
[F3] key/AUTO PUNCH parameter
This parameter enables you to set the Auto Punch In/Out function on or off. Pressing the
between ON
more information on the Auto Punch In/Out function.)

Sync/Clock function

This function enables you to set the sync and digital clock parameters, as well as adjusting the recording/playback
speed (Vari Pitch).
[F1] key/VARI PITCH parameter
This parameter enables you to set up the Vari Pitch function on or off and to adjust the recording/playback
speed. Use the
recording and playback speed varies according to the value specified in the field (1).
1 This numeric field allows you to specify the amount of recording/playback speed variation as a percent-
age, based on a standard speed of 100%. Move the cursor to this field, and turn the [JOG] wheel to
adjust the value.
100
(Q-Link Functions, Setup Mode)
[F1] – [F3] keys for each function.
[F1]
and keys) repeatedly. (See page 48 for more information on the Repeat function.)
[IN] [OUT]
and OFF . When this parameter is turned on, you can perform Auto Punch In/Out. (See page 51 for
1
[F1]
key to toggle the Vari Pitch function
[F1]
[F2] [F3] [F4]
2
[F2] [F3] [F4]
and . When the function is turned on, the
ON OFF
[F1] key toggles between
key toggles between
[F2]
[F3] key toggles
ON and
ON