MONO FLANGER
This is a common flanger effect with mono-in and mono-out. You can adjust the pan setting of the effect sound.
Parameter
1
Rate *1
0.1Hz – 10.0Hz
2
Depth *2
0 – 127
3
FB Inv *4
ON/OFF
4
Fdback *5
0 – 127
5
Pan *6
L63 – MID – R63
6
Balance
+50 – 0 – –50
7
Effect
ON/OFF
STEREO FLANGER
This is a stereo flanger effect that adds width and spread.
Parameter
1
Rate *1
0.1Hz – 10.0Hz
2
Depth *2
0 – 127
3
FB Inv *4
ON/OFF
4
Fdback *5
0 – 127
5
Width *6
0 – 127
6
Balance
+50 – 0 – –50
7
Effect
ON/OFF
Setting range
Adjusts the speed of LFO.
Adjusts the depth of LFO.
Inverses the phase of feedback signals when turned on.
Adjusts the feedback amount.
Adjusts the stereo image of the effect sound.
Adjusts the balance between the effect sound and dry sound. (Effect
sound only at a value of +50)
Switches the effect sound output on and off.
Setting range
Adjusts the speed of LFO.
Adjusts the depth of LFO.
Inverses the phase of feedback signals when turned on.
Adjusts the feedback amount.
Adjusts the width and spread of the stereo image.
Adjusts the balance between the effect sound and dry sound. (Effect
sound only at a value of +50)
Switches the effect sound output on and off.
Chapter 13: Using the Effects
1
2
3
4
5
6
7
Function
1
2
3
4
5
6
7
Function
159