Enhancer; Multi Tap Delay - Akai DPS16 Operator's Manual

ENHANCER

This monaural effect gives frame to the sound by adding new overtones.
Parameter
1
Drive *1 0dB – 30dB
2
Tune *2 0 – 127
3 Damp *3 0 – 127
4 Harm *4 0 – 127
5 Balance +50 – 0 – –50
6 Effect ON/OFF

MULTI TAP DELAY

This delay effect creates a special effect by adjusting the interval between feedback sounds and the level change
curve of the feedback sounds.
Parameter
1
Delay *1 1 – 127
2
Width *2 2 – 15
3
Shape *3 –10 – +10
4 Slope *4 –10 – +10
5 Fdback *5 0 – 127
6 Pan *6 –10 – +10
7
Balance +50 – 0 – –50
8 Effect ON/OFF
ENHANCER
Setting range
Adjusts the gain of the signal input to the harmonics generator.
Adjusts the filter cut-off frequency.
Adjusts the filter attenuation curve (slope).
Adjusts the signal level of the emphasized harmonics.
Adjusts the balance between the effect sound and dry sound. (Effect
sound only at a value of +50)
Switches the effect sound output on and off.
Setting range
Adjusts the delay time.
Adjusts the left and right spread of the feedback sound.
Adjusts the interval between the feedback sounds.
Adjusts the attenuation curve of the feedback sound.
Adjusts the feedback sound.
Adjusts the stereo image of the effect sound.
Adjusts the balance between the effect sound and dry sound. (Effect
sound only at a value of +50)
Switches the effect sound output on and off.
Chapter 13: Using the Effects
1
2
3
4
5
6
Function
1
2
3
4
5
6
7
8
Function
179