Akai DPS16 Operator's Manual page 89

Send 1 Master: Master level setting for Send 1
Send 2 Master: Master level setting for Send 2
Send 3 Master: Master level setting for Send 3
Send 4 Master: Master level setting for Send 4
Master Level: Output level setting for Master bus
When the master section is selected:
• SEND
Send 1 Master: Send 1 master level
Send 2 Master: Send 2 master level
Send 3 Master: Send 3 master level
Send 4 Master: Send 4 master level
Master Level: Master bus output level
• RETURN
FX 1 Return: Internal effect 1 return level
FX 2 Return: Internal effect 2 return level
FX 3 Return: Internal effect 3 return level
FX 4 Return: Internal effect 4 return level
4. Use the [C1]–[C6] knobs to adjust the target mix parameters.
The mix parameter settings changed via the QLMC are reflected on each page of Mixer mode, and
TIP :
vice versa.
NOTE : If the Send Type
REO ", the SEND indication changes. For example, if you set Send 1–2 to "
as follows:
• SEND
field on the Global Settings page in Mixer mode (see page 71) is set to "
Chapter 6: Mixer Function
• RETURN
[F6] key
STEREO ", the indication changes
(Mixer Mode)
FX 1 Return: Return level setting
for internal effect 1
FX 2 Return: Return level setting
for internal effect 2
FX 3 Return: Return level setting
for internal effect 3
FX 4 Return: Return level setting
for internal effect 4
STE-
77