Table of Contents
Advertisement
[F2] key/SYNC parameter
The following parameters are used to synchronize the DPS16 to an external MIDI device. Use the
toggle the sync operation
in sync as specified in the field (2). (Refer to Chapter 12 "MIDI Applications" for more information on the
sync operation using external devices.)
2 This field enables you to select the type of sync operation of the DPS16 and the external device. Move
the cursor to this field and turn the [JOG] wheel to select a type from the following four options.
•
MIDI CLK/MASTER
•
.............. The MIDI timecode (MTC) is transmitted from the MIDI OUT jack. The MTC frame
MTC/MASTER
•
MTC/SLAVE
................ The DPS16 receives the MIDI timecode (MTC) at the MIDI IN jack and synchronizes
•
OFF
............................... Synchronization is turned off. (The same occurs when you press the
[F3] key/DIGITAL CLOCK parameter
This parameter enables you to select a digital clock source for DPS16 operation. Use the
between two settings (
•
INT
(internal clock) ................. The DPS16 follows its internal clock (default setting). For usual use, select this
•
DIG IN
(external clock) .......... The DPS16 locks to the external digital clock.
TIP :
When a digital signal is input from the DIGITAL IN jack of the DPS16, select "
clock) to obtain quality signal.
Track View function
This function enables you to zoom the Track View window on the main screen in and out.
[F1] key/ZOOM OUT
Press the
key to zoom out the Track View window horizontally. The Zoom Out function does not provide
[F1]
any parameters.
[F2] key/ZOOM IN
Press the
key to zoom in the Track View window horizontally. The Zoom In function does not provide any
[F2]
parameters.
NOTE :
With this function, the
ON
and
OFF
. When this field is set to
. The MIDI clock and Song Position Pointer are transmitted from the MIDI OUT jack
of the DPS16 to synchronize with the external device.
rate parameter is set in Setup mode. (See page 132.)
to the timecode. The frame rate parameter is set in Setup mode. (See page 137.)
SYNC parameter to "
OFF
INT
and
DIG IN
).
setting.
[F1]
[F2]
[F3]
key does not have any parameters or functions.
Chapter 9: Various Settings
ON
, the DPS16 and the external device operate
".)
[F3]
[F4]
(Q-Link Functions, Setup Mode)
key to
[F2]
[F2]
key to set the
key to toggle
[F3]
DIG IN
" (external
101
- Quick Links:
- Features of the Dps16
- Specifications
Hide quick links:
Advertisement
Table of Contents
