Scene Memory page
While the Control View page or the Channel View page is displayed, pressing the
Scene Memory page, where you can store all mix parameters in Mixer mode as a "scene" and recall stored scenes.
The following mix parameters can be stored as part of a scene.
• Channel on/off
• Channel level
• Channel pan
• Channel AUX send setting
• Channel EQ setting
• Channel signal (sent to the ping-pong bus) on/off
• Master bus output level
• Ping-pong bus output level
• AUX send master level
• Effect settings
The Scene Memory page has the following information:
1 This is a list of scenes stored in the memory. Unused scenes are indicated by "
2 [F1] (
) key
CLOSE
This function key is used to close the Global Settings page to return to the Channel View page.
3 [F2]–[F4] keys
These function keys are used to store and recall scenes.
Basic operation on the Scene Memory page
Storing a scene
1. While the Control View page or the Channel View page is displayed in Mixer mode, press the [F4]
(
) key to access the Scene Memory page.
SCENE
2. Use the [CURSOR] key to move the cursor to the number of the scene memory you wish to store.
1
2
ex: Scene Memory number 6 is selected.
Chapter 6: Mixer Function
(
[F4]
3
(unused)
(Mixer Mode)
) key accesses the
SCENE
".
73