Creating A New Project - Akai DPS16 Operator's Manual

Chapter 10: Project Management (Project Mode)

Creating a new Project

You need to create a new Project to make a new recording. Follow the steps below to create a new Project.
1. Press the [F5] (
The following window appears.
1
New project
This field enables you to name a new Project. Press the
(See page 17.)
2
Resolution
This field enables you to set the resolution for recording and playback of Projects.
3
Sampling rate
This field enables you to set the sampling rate for recording and playback of Projects.
2. Move the cursor to fields 1–3 and set the parameters, if necessary.
TIP : You can change the sampling rate in Setup mode after you create a new Project. (See page 106.)
However, if you have recorded in any track, changing the sampling rate later will change the pitch.
3. Press the [F6] (
The DPS16 creates a new Project and displays the Main screen.
Press the
[F1]
NOTE : When you create a new Project, the Project is selected as the current Project, and the previous
Project is automatically stored on the current disk.
112
) key on the Project screen.
NEW
) key.
DO IT
( ) key to cancel the operation.
CANCEL
key to start naming the Project.
[NUMBER/NAME]
1
2
3