Chapter 13: Using the Effects
2. Turn the [JOG] wheel to move the cursor to the desired effect type.
3. Press the [F1] (
PING PONG DELAY
Editing effect parameters
The effect parameters are set to the recommended values. However, you can change these values if necessary.
1. In the
FX
2. Press the [F1] (
The DPS16 displays the parameters of the target effect type.
1
This field illustrates the structure of the effects and the parameter function.
2
This field displays and enables you to change the effect parameter values. (See page 157 for the
parameter description of each effect type.)
146
) key.
SELECT
is selected as an effect type for FX1, and the Effect screen is restored.
field, select the target effect (
) key.
EDIT
<ex. PING PONG DELAY is selected.>
–
) for which you wish to edit the parameters.
FX1
4
1
2