Auto Pan - Akai DPS16 Operator's Manual

Chapter 13: Using the Effects
• Switching the speed using the [F4](
Pressing the
to adjust the time (duration) taken for switching between two speeds.
• Switching the speed using the Control Change messages:
When the DPS16 receives a specified Control Change message, Rate 1 is selected if the value falls between 0
and 63, and Rate 2 is selected if the value falls between 64 and 127. Use the
Control number and the
speeds.
NOTE :
for Control Change messages to control mix parameters (see page 139) and for Control Change messages
for this effect.

AUTO PAN

This auto pan effect automatically rotates the stereo image of the sound left and right. It also adds depth of
rotation.
Parameter
1
Rate *1
2 Mode *2
3 Width *6
4
Balance
5
Effect
164
( MANUAL ) key repeatedly toggles between Rate 1 and Rate 2. Use the
[F4]
Accel (3) parameter to set the time (duration) taken for switching between two
To avoid possible confusion, it is recommended that you select a different MIDI receive channel
Setting range
0.1Hz – 10.0Hz
Pan
L>R
R>L
0 – 127
+50 – 0 – –50
ON/OFF
Pan
L
L
) key:
MANUAL
Adjusts the speed of panning
A common auto pan.
Simulates a sound source that rotates counterclockwise.
Simulates a sound source that rotates clockwise .
Adjusts the panning width.
Adjusts the balance between the effect sound and dry sound. (Effect
sound only at a value of +50)
Switches the effect sound output on and off.
L
L
¤ R
L
' R
Accel parameter (3)
CtrlNo. (6) parameter to set the
1
2
3
4
5
Function
R
R
R