Akai DPS16 Operator's Manual page 131

4. Move the cursor to the
5. Move the cursor to the
device.
6. Move the cursor to the
device (
FULL FORMAT
• If the backup disk has not been formatted, select "
erase operation, see page 127.)
• You can select " APPEND
ERASE command.
7. If you have selected the ID number of the CD-R/CD-RW drive in step 5, perform the following
operations, as necessary.
When you press the
[F5]
• In the
Write speed
The selectable options are
fastest speed of the connected drive available within the range of x1 to x8 is used.
• If you wish to perform test write before the writing operation, set the
page 115).
8. Press the [F5] (
DO IT
• If you have selected " APPEND
• If you have selected " FULL FORMAT
information (ID, product name, manufacturer name, and version number), and the confirmation for erasing the
contents.
CAUTION : If you execute the operation, all data on the backup disk will be erased. Proceed very carefully
so that important data is not lost.
9. Press the [F6] (
DO IT
The format/erase operation starts on the backup disk. When it is completed, the backup operation starts.
When the backup operation is completed, the display returns to the Project screen.
To cancel the operation, press the
field (2) and set to "
Device
Destination Disk
field (8) and specify whether to format the backup SCSI
Disk Operation
), erase the data on the device (
" for a SCSI device that already has backup data via the
( DO IT ) key, the following window appears.
field (1), select the writing speed.
MAX , SLOW (x1) , FAST x2
) key.
" in step 6, the backup operation starts when you press the
" or " FAST ERASE
) key to execute the backup operation.
( CANCEL ) key.
[F1]
Chapter 10: Project Management (Project Mode)
".
SCSI
field (3) and select the ID number of the backup SCSI
), or add backup data (
FAST ERASE
FULL FORMAT ". (For more information on the format and
(x2)
, x3 , x4 , x5 , x6 , x7 , and
Test write
" in step 6, the screen displays the backup device
APPEND
FULL FORMAT or FAST
1
2
x8 . When MAX is selected, the
field (2) to ON (See
[F5] ( DO IT ) key.
).
119