Controlling The Effect Parameters Using The Qlmc Section - Akai DPS16 Operator's Manual

3. Move the cursor to the target parameter and turn the [JOG] wheel to change the value.
TIPS:
• If you set QLMC's "mode" to "EFFECT" and "panel" to FX1–4, you can adjust some parameters of
the target effects using QLMC (
• You can also use the
4. When you finish setting the parameters, press the [F1](

Controlling the effect parameters using the QLMC section

When the Main screen or a Mixer mode screen is displayed, the
QLMC (Q-Link Mixer Control) section appears on the right of the
display.
QLMC is a function that directly controls the DPS16's mix param-
eters and effect parameters. Six knobs ([C1]-[C6]) on the right side of
the display correspond to the parameters shown on the display, and
are used to adjust the parameters during recording or playback.
1. While the main screen or a
Mixer mode screen is displayed,
press the [F5] key to select
" " as the QLMC mode.
EFFECT
While the main screen or a Mixer
mode screen is displayed, pressing
the [F5] key enables you to select a
QLMC mode from "
(controlling mixer parameter) and
" EFFECT " (controlling effect
parameters).
–
[C1] [C6]
[F3] key to toggle between two parameter screens of some effect types.
MIXER "
knobs).
) key to return to the Effect screen.
EXIT
[F5] key
Chapter 13: Using the Effects
C1
C3
C5
C2
C4
C6
147