Installation Of Options - For Service Technicians; Installing Eb4M; Installing Hard Disk - Akai DPS16 Operator's Manual

Appendix

Installation of Options - For Service Technicians

• Consult your AKAI professional dealer where you purchased or the AKAI professional Service Center for the
installation of disk drive.

Installing EB4M

EB4M contents
EB4M P.C. Board ........................................ x1
Plastic Support ............................................ x3
Mounting EB4M P.C. Board
1. Loosen the 4 screws for the bottom cover and remove it as illustrated.
2. Place the Plastic Supports to the MAIN P.C. Board firmly then insert the EB4M P.C. Board matching the position
of connectors.
3. Replace the bottom cover and tighten the 4 screws.

Installing Hard Disk

With the Disk Mounting Kit included in the DPS16, the IDE Disk Drive can be mounted inside the DPS16.
• Consult your AKAI professional dealer or AKAI professional Service for the drives that can be installed.
Disk Mounting Kit contents
1 Metal Prop (inch-thread) ............................................................ x4
2 Drive Mounting Screw (inch-thread, 3.2x5) ............................... x4
3 Metal Prop (milli-thread) ............................................................ x4
4 Drive Mounting Screw (milli-thread, 3x3) ................................... x4
184