Pan; Bus; Channel - Akai DPS16 Operator's Manual

PAN

You can adjust the stereo image for the channels.
Range: R63 – 0 – L63
You can also use the
TIP :
NOTE : When you change the pan setting of the TRACK MIX channels using the
appears on top of the knob graphic on the screen. This square icon
does not match the actual pan setting. If you move the corresponding knob on the top panel, the pan
setting will not change until the knob position passes over the current value and the square
<ex. The knob position of TRACK MIX channel 2 does not match its real value.>

BUS

You can turn the channel signals sent to the ping-pong bus on and off.
Range: ON/OFF
You can also use the [INPUT SELECT]
MIX channels) to turn the
The ping-pong bus is a stereo bus, which is different from the master bus, and it is used to mix
NOTE :
audio data on multiple tracks down to one or two tracks (such as for ping-pong recording). See page 81
for information on ping-pong recording.

CHANNEL

You can turn channel signals on and off. The off channels are muted and do not output any signal.
Range: ON/OFF
You can also use the
[INPUT SELECT]
MIX channels) to turn the channels on and off.
controls on the top panel to adjust the pan setting for TRACK MIX channels.
[PAN]
keys (INPUT MIX channels) or the
BUS parameter on and off.
keys (INPUT MIX channels) or the
Chapter 6: Mixer Function
[JOG] wheel, a square
means that the current knob position
[TRACK SELECT] keys (TRACK
keys (TRACK
[TRACK SELECT]
(Mixer Mode)
disappears.
65