Copy → Insert; Cut → Overwrite - Akai DPS16 Operator's Manual

Chapter 8: Edit Technique (Edit Mode)
COPY → INSERT
This command enables you to copy data between the IN and OUT points and insert it after the
(current position). The copy source data between the IN and OUT point will remain intact, and the existing data in
the destination after the
TIP : You can repeatedly insert the copied data between the IN and OUT point. Move the cursor to the
Repeat times
CUT → OVERWRITE
This command enables you to cut (delete) data between the IN point and OUT point, and paste the data after the
. Silence will be created between the IN and OUT point, and the existing data in the destination will be
Now time
overwritten.
94
Now time will move forward in time.
IN point
1 2 3
Before edit
1 2 3
After edit
field and turn the [JOG] wheel to specify the number of repeats.
IN point
1 2 3
Before edit
1 2
After edit Silence
OUT point
4 5 6 7 8
4 5 6 3 4
Now time
OUT point
4 5 6 7 8
5 6 3 4
Now time
Now time
9
7 8 9
9
9