Type And Function Of Edit Commands; Copy → Overwrite - Akai DPS16 Operator's Manual

If you select a command that enables you to edit a single track (such as INSERT SILENCE command), use the
[RECORD SELECT]
7. Set the
Repeat times
Refer to "Type and function of edit commands" on this page for more details on edit commands.
8. Press the [F6] (
DO IT
The edit command is executed.
TIP : You can undo the execution of edit commands using the Undo function. Refer to page 33 for more
information on the Undo function.
NOTE : If you try to execute the edit command even if the number of selected FROM tracks and the number
of selected TO tracks do not match, the following error message appears. Press any key, then match the
number of both tracks.

Type and function of edit commands

This section explains the type and function of edit commands.
COPY → OVERWRITE
This edit command enables you to copy data between the IN and OUT points and overwrite the area that begins
with the . The data between the IN and OUT points remains intact, and the existing data in the destina-
Now time
tion area after the Now time
TIP : You can repeatedly paste the copied data between the IN and OUT point. Move the cursor to the
field and turn the [JOG] wheel to specify the number of repeats.
Repeat times
keys to select a track to be edited.
, , and other parameters, if necessary.
New length
) key.
is overwritten.
IN point
1 2
Before edit
1 2
After edit
Chapter 8: Edit Technique (Edit Mode)
OUT point
3 4 5 6 7
3 4 5 6 3
Now time
8 9
4 9
93