Qlmc (Q-Link Mixer Control) - Akai DPS16 Operator's Manual

Chapter 1: Overview of the DPS16
3. Press the key that corresponds to the letter, number, or symbol you wish to enter.
The character that corresponds to the pressed key is entered and the underline moves to the right.
4. Repeat Step 3 repeatedly to complete naming.
5. Press the [NUMBER/NAME] key again.
The
[NUMBER/NAME]

QLMC (Q-Link Mixer Control)

When the Main screen or a Mixer mode screen is displayed, the QLMC (Q-Link Mixer Control) section appears
on the right side of the display. QLMC is a function used to directly control the DPS16's mix parameters and
effect parameters.
Six knobs (
[C1]
used to adjust the parameters during recording or playback.
1 Indicates the channel currently selected for editing. To select a channel, use the [TRACK SELECT] keys
for TRACK MIX channels, the [INPUT SELECT] keys for INPUT MIX channels, and the [MASTER] key
for the master section.
2 Indicates the names of parameters and settings controlled by six Q-Link knobs.
3 QLMC mode selection ([F5] key)
The [F5] key enables you to select a QLMC mode from among "
" EFFECT
4 Parameter selection (
The [F6] key enables you to select a parameter that appears in area (2). Parameters you can select vary
depending on the current QLMC mode.
See page 75 for more information on how to control mix parameters using the QLMC section, and
TIP :
page 147 for more information on how to control effect parameters using the QLMC section.
18
key's LED turns off, and the entered characters are confirmed.
– ) on the right side of the display correspond to the parameters shown on the display and are
[C6]
" (controlling effect parameters).
key)
[F6]
2
3 4
1
[C1]
[C2]
[C3]
[C4]
[C5]
[C6]
MIXER " (controlling mixer parameter) and