Akai DPS16 Operator's Manual page 133

The following screen appears.
1
2
1
Approx. time
Indicates approximate time taken until the backup operation is completed. This estimate is calculated based
on the sampling rate of 48kHz.
2
Sampling rate
Enables you to select a sampling rate used for recording to a connected DAT recorder.
5. In the
Sampling rate
a connected DAT recorder.
6. Press the [F5] (
DO IT
The following screen appears.
7. Start recording on the DAT recorder, and press the [F6] (
The backup operation starts. When it is completed, the display returns to the Project screen.
Press the (
[F1] CANCEL
CAUTION : Do not monitor the audio via the DAT during the backup operation. Since audio and other
data is transmitted as a digital signal, an attempt to monitor it may damage the speakers.
( / /
32kHz 44.1kHz 48kHz
field (2), select a sampling rate (
) key.
) key to cancel the backup operation in step 6.
Chapter 10: Project Management (Project Mode)
)
/
32kHz 44.1kHz
) key on the DPS16.
START
/ ) used for recording to
48kHz
121