Independent Insert Effect Bypass
You can now enable or disable individual insert effects
independently of the others on the same channel. In
other words, you no longer have to use the On/Off
button to enable or disable all of them at once.
To enable or disable an insert effect slot, do either
of the following:
•
Press and hold Shift on your computer
keyboard, and then click the insert slot above
the channel strip.
•
Double-click the insert effect slot to open its
parameters, and then click the On/Off button in
the upper-left corner.
Hardware: To enable or disable an insert effect slot,
move the cursor over it, and then press Window.
362