Performing Distance Correction During Cutting - Roland TrueVIS VG-640 User Manual

Advanced Cutting Settings

Performing Distance Correction During Cutting

Procedure
A
Press [MENU].
B
Press [ ] to display the screen shown below.
MENU
CUTTING MENU
C
Press [ ] once, and then press [ ] twice to display the screen shown below.
CUTTING MENU
CALIBRATION
D
Press [ ] twice to display the screen shown below.
FEED SETTING
0.00%
4
E
Press [ ] or [ ] to select the correction value.
Set the correction value of the media feed direction.
FEED SETTING
0.00%
I m p o rt a n t
When you are performing printing followed by cutting, be sure to set the correction value to "0.00%."
If you do not set it to "0.00%," the printing and cutting positions will be misaligned.
F
Press [ENTER] to confirm your entry.
G
Press [ ], then [ ] to display the screen shown below.
CALIBRATION
SCAN SETTING
H
Press [ ] to display the screen shown below.
SCAN SETTING
0.00%
138
0.00%
-0.10%
0.00%