Network Setup; Wireless Status - Fuji Xerox DocuPrint CM405 df User Manual

Network Setup

Use the Network Setup menu to change the printer settings affecting jobs sent to the printer through the wired or
wireless network.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Ethernet/Wireless
NOTE:
• When using a wired network, Ethernet is displayed. When the optional wireless printer adapter is attached and the
Ethernet cable is disconnected, Wireless is displayed.
Purpose:
To confirm or specify network settings.

Wireless Status

NOTE:
• Wireless Status feature is available only when the printer is connected using the wireless network.
Purpose:
To confirm the wireless communication status.
Values:
Status
SSID
Encryption Type
*The settings can be configured only on CWIS.
290
Using the Operator Panel Menus and Keypad
Good
Acceptable
Low
No Reception
Displays the name that identifies the wireless network.
No Security
WEP
WPA-PSK-TKIP
WPA2-PSK-AES
Mixed mode PSK
WPA-Enterprise-TKIP*
WPA2-Enterprise-AES*
Mixed mode Enterprise*