I Cannot Complete The Wireless Network Setup Configuration - Fuji Xerox DocuPrint P385 dw User Manual

Home > Troubleshooting
Configuration

I Cannot Complete the Wireless Network Setup Configuration

Related Models:DocuPrint P385 dw/DocuPrint P375 dw
Turn your wireless router off and back on. Then try to configure the wireless settings again. If you are unable to
resolve the problem, follow the instructions below:
Investigate the problem using the WLAN Report.
Cause
Your security settings
(SSID/Network Key) are not
correct.
Your Fuji Xerox machine's
MAC address is not
allowed.
Your wireless LAN access
point/router is in stealth
mode (not broadcasting the
SSID).
Your security settings
(SSID/password) are not
correct.
You are using Android™
4.0.
Your Fuji Xerox machine is
placed too far from your
mobile device.
There are some
obstructions (walls or
furniture, for example)
between your machine and
the mobile device.
There is a wireless
computer, Bluetooth-
supported device,
microwave oven, or digital
cordless phone near the Fuji
Xerox machine or the
mobile device.
> Network Problems > I Cannot Complete the Wireless Network Setup
Action
• Select and confirm that you are using the correct security
settings.
- See the instructions supplied with your wireless LAN access
point/router for information on how to find the security
settings.
- The manufacturer's name or model number of the wireless
LAN access point/router may be used as the default security
settings.
- Consult with the access point/router manufacturer, your
Internet provider, or network administrator.
Confirm that the Fuji Xerox machine's MAC Address is allowed in
the filter. You can find the MAC Address on your Fuji Xerox
machine's control panel.
• Enter the correct SSID name or Network Key manually.
• Check the SSID name or the Network Key in the instructions
supplied with your wireless LAN access point/router and
reconfigure the wireless network setup.
• Confirm the SSID and password.
- When you are configuring the network manually, the SSID
and password are displayed on your Fuji Xerox machine. If
your mobile device supports the manual configuration, the
SSID and password will be displayed on your mobile device's
screen.
If your mobile device disconnects (approximately six minutes after
using Wi-Fi Direct), try the one-push configuration using WPS
(recommended) and set the Fuji Xerox machine as a G/O.
Move your Fuji Xerox machine within about 3.3 feet (1 metre) of the
mobile device when you configure the Wi-Fi Direct network settings.
Move your Fuji Xerox machine to an obstruction-free area.
Move other devices away from the Fuji Xerox machine or the mobile
device.
Interface
Wireless
Wireless
Wireless
Wi-Fi Direct
Wi-Fi Direct
Wi-Fi Direct
Wi-Fi Direct
Wi-Fi Direct
239