Fuji Xerox DocuPrint CM405 df User Manual page 292

Manual Enter SSID
SSID Setup
Infrastructure
Ad-hoc
292
Using the Operator Panel Menus and Keypad
Specifies a name to identify the wireless network. Up to
32 alphanumeric characters can be entered.
Select when you configure the wireless setting through
the access point such as a wireless router.
No Security Specifies to configure the wireless setting without
specifying a encryption type from WEP,
WPA-PSK-TKIP, and WPA-PSK-AES.
Mixed mode Select to configure the wireless setting with the
*
PSK encryption type of Mixed mode PSK.
Wireless Setup
Password
WPA-PSK-TKIP Select to configure the wireless setting with the
encryption type of WPA-PSK-TKIP.
Wireless Setup
Password
WPA2-PSK-AES Select to configure the wireless setting with the
encryption type of WPA2-PSK-AES.
Wireless Setup
Password
WEP Specifies the WEP key to use through the wireless
network. For 64bit keys, up to 10 hexadecimal
characters can be entered. For 128bit keys, up to 26
hexadecimal characters can be entered.
Transmit Key
Select to configure the wireless setting without the
access point such as a wireless router.
No Security* Select to configure the wireless setting without
specifying the encryption type from WEP.
WEP Specifies the WEP key to use through the wireless
network. For 64bit keys, up to 10 hexadecimal
characters can be entered. For 128bit keys, up to 26
hexadecimal characters can be entered.
Transmit Key
Specifies the password of
alphanumeric characters from 8
to 63.
Specifies the password of
alphanumeric characters from 8
to 63.
Specifies the password of
alphanumeric characters from 8
to 63.
Specifies the transmit key from
Auto, WEP Key 1, WEP Key
2, WEP Key 3,and WEP Key
4.
Specifies the transmit key from
WEP Key 1, WEP Key 2, WEP
Key 3, and WEP Key 4.