Deleting Stored Jobs - Fuji Xerox DocuPrint CM405 df User Manual

2
Select Print from.
3
Select a user ID you specified in the print driver.
4
Select the document you want to print.
NOTE:
• By default, the driver setting is used for the number of copies to print. You can select Quantity to change the setting.
5
Select Print.
NOTE:
• If you want to delete the data in the memory or hard disk after printing, select the Print and Delete check box.
6
Select OK.
The stored document will be printed.
• Specifying Your Passcode on the Operator Panel (Secure Print)
When you select your user ID for Secure Print, a screen to enter the passcode appears.
Use the number pad to enter the numeric passcode you specified in the print driver. The passcode you entered will
be displayed as asterisks (*******) to ensure confidentiality.
If you enter an invalid passcode, the message Invalid Passcode Please re-enter 4 digit PIN appears.
Wait three seconds, or select Close to return to the screen to enter the passcode.
When you enter a valid passcode, you have access to all print jobs matching the user name and passcode you
entered. The print jobs matching the passcode you entered appear on the screen. You can then choose to print or to
delete jobs matching the passcode you entered. (See

• Deleting Stored Jobs

A job that has been stored will be deleted after printing if selected to do so on the operator panel. Otherwise, the job
remains stored until you delete them on the operator panel.
NOTE:
• The data in the memory is cleared when the printer is turned off. The data on the optional hard disk unit is not cleared even
when the printer is turned off.
156
Printing Basics
"Printing the Stored Jobs" on page 155 for more information.)