Removing The 2Nd Btr; Installing A 2Nd Btr - Fuji Xerox DocuPrint CM405 df User Manual

Removing the 2nd BTR

1
Pinching the tabs on both sides of the 2nd BTR, lift it out of the printer.

Installing a 2nd BTR

1
Unpack a new 2nd BTR.
2
Hold the 2nd BTR by its both ends.
3
Make sure that the arrow marks on the 2nd BTR and the printer face each other, and then press down the 2nd
BTR until it clicks.
4
Close the rear cover.
441
Maintenance