Sided Copying; Original Type; Sharpness - Fuji Xerox DocuPrint CM405 df User Manual

 2 Sided Copying
To make duplex copies with the specified binding position.
1
Select 2 Sided Copying.
2
Select the desired setting, and then select OK.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
1 → 1 Sided*
1 → 2 Sided
2 → 1 Sided
2 → 2 Sided
When you are using the document glass and it is set to 1→2 Sided or 2→2 Sided, the display prompts you for
another page after pressing the
If you want to place a new document, replace the document with a new document, and then select
a
Continue or press the
If you finish copying, select Print Now.
b
NOTE:
• When you use the DADF to copy both sides of a document, the printed position of the front and back of the document
may differ if the size in the document size setting and the size of the document do not match. In this case, set Document
Size to the same size as the document.
 Original Type
To select the copy image quality.
1
Select the Quality tab, and then select Original Type.
2
Select the desired setting, and then select OK.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
Photo & Text*
Text
Photo
 Sharpness
To adjust the sharpness to make the copy image sharper or softer than the original.
1
Select the Quality tab, and then select Sharpness.
2
Select the desired setting, and then select OK.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
Sharpen
Normal*
Soften
196
Copying
Binding of Output
Binding of Original
(Start) button.
(Start) button.
Used for documents with photos and text.
Used for documents with text.
Used for documents with photos.
Makes the copy image sharper than the original.
The color clarity of the image is the same as the original.
Makes the copy image softer than the original.
Long Edge Binding
Short Edge Binding
Long Edge Binding
Short Edge Binding
Select 1-sided or 2-sided and specify
binding position for the 2-sided copy.