Fax Cover Page; Dial Type; Send Header - Fuji Xerox DocuPrint CM405 df User Manual

Dial Type

Purpose:
To select the dialing type.
Values:
*
PB
DP(10PPS)
DP(20PPS)
Prefix Dial
Purpose:
To select whether to set a prefix dial number.
Values:
*
Off
On
Prefix Dial Number

Fax Cover Page

Purpose:
To set whether to attach a cover page to faxes.
Values:
*
Off
On

Send Header

Purpose:
To print the information of the sender on the header of the faxes.
Values:
Off
*
On
ECM
Purpose:
To set whether to enable or disable the Error Correction Mode (ECM). To use the ECM, the remote machines must
also support the ECM.
Values:
Off
*
On
302
Using the Operator Panel Menus and Keypad
Uses tone dialing.
Sets DP (10PPS) (Dial Pulse, 10 Pulse Per Second) as the dial type.
Sets DP (20PPS) (Dial Pulse, 20 Pulse Per Second) as the dial type.
Does not set a prefix dial number.
Sets a prefix dial number.
Sets a prefix dial number of up to five digits. This number dials before
any auto dial number is started. It is useful for accessing the Private
Automatic Branch Exchange (PABX).
Does not attach a cover page to faxes.
Attaches a cover page to faxes.
Does not print the sender's information on the header of faxes.
Prints the sender's information on the header of faxes.
Disables the ECM.
Enables the ECM.