Bypass Tray - Fuji Xerox DocuPrint CM405 df User Manual

• Bypass Tray

Purpose:
To specify the paper loaded in the bypass tray.
Values:
Display Tray
Prompt
Use Driver
Settings for Print
Job
Size
mm series
inch series
Enter a check to display a popup message that prompts to set Type and Size when paper is loaded
in the bypass tray. The factory default is on (check).
Enter a check to use the Size and Type set on the print driver. The factory default is off (blank).
*1
A4 (210 x 297 mm)
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Letter (8.5 x 11")
Folio (8.5 x 13")
Legal (8.5 x 14")
Executive (7.25 x
10.5")
Monarch Env. (3.9 x
7.5")
DL Env. (110 x 220
mm)
C5 Env. (162 x 229
mm)
#10 Env. (4.1 x 9.5")
New Custom Size Width(x)
Length(y)
*1
Letter (8.5 x 11")
Folio (8.5 x 13")
Legal (8.5 x 14")
A4 (210 x 297 mm)
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Executive (7.25 x
10.5")
Monarch Env. (3.9 x
7.5")
DL Env. (110 x 220
mm)
C5 Env. (162 x 229
mm)
#10 Env. (4.1 x 9.5")
New Custom Size Width(x)
Length(y)
*
210 mm
77-215 mm
*
297 mm
127-355 mm
*
8.3 inches
3.0-8.5 inches
*
11.7 inches
5.0-14.0 inches
Using the Operator Panel Menus and Keypad
Specifies the width of the custom
size paper.
Specifies the length of the custom
size paper.
Specifies the width of the custom
size paper.
Specifies the length of the custom
size paper.
333