Setting A Digital Certificate - Fuji Xerox DocuPrint CM405 df User Manual

6
Enter a password corresponding to the certificate file to be imported.
7
Re-enter the password again to confirm it.
8
Click Browse of File Name, and select the file to be imported.
9
Click Import to import the certificate.

Setting a Digital Certificate

NOTE:
• To manage digital certificates, you must first set encryption of the optional hard disk unit to On, and then set up HTTPS
communication. For details, see
1
Launch your web browser.
2
Enter the IP address of the printer in the address bar, and then press the Enter key.
NOTE:
• To access CentreWare Internet Services when data encryption is enabled, enter "https" before its address instead of
"http".
Example: https://192.168.1.100/
The printer's web page appears.
3
Click the Properties tab.
4
In the left navigation panel, scroll down to Security and select SSL/TLS Server Communication.
5
Click Certificate Management to display the Certificate Management page.
NOTE:
• The Certificate Management button is displayed only when the optional hard disk unit is installed and Data
Encryption is set to On.
6
When setting a Wireless LAN (Server) certificate, select Trusted Certificate Authorities within Category.
When setting a certificate of SSL Server, SSL Client, IPsec, or Wireless LAN (Client), select Local Device.
7
Select the purpose of use from the Certificate Purpose list.
8
Click Display the List to display the Certificate List page.
NOTE:
• If the list includes more than 20 certificates, click Next to display the next page.
9
Select the certificate to associate. At this time, confirm that Validity of the certificate selected is set to Valid.
10
Click Certificate Details to display the Certificate Details page.
11
Confirm the content, and click Use this certificate at the upper-right corner.
"Preparing to Manage Certificates" on page 174.
Printing Basics
177