Fuji Xerox DocuPrint CM405 df User Manual page 335

• Tray1
Purpose:
To specify the paper loaded in the standard 550 sheet tray.
Values:
Display Tray Enter a check to display a popup message that prompts to set Type and Size when paper is loaded in
Prompt the standard 550 sheet tray. The factory default is on (check).
Size A4 (210 x 297
mm)
mm series A5 (148 x 210 mm)
B5 (182 x 257 mm)
Letter (8.5 x 11")
Folio (8.5 x 13")
Legal (8.5 x 14")
Executive (7.25 x
10.5")
New Custom Size
inch series Letter (8.5 x 11")
Folio (8.5 x 13")
Legal (8.5 x 14")
A4 (210 x 297 mm)
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Executive (7.25 x
10.5")
New Custom Size
Type Plain
Other Type
Lightweight
Cardstock
Heavyweight
Cardstock
Light Glossy
Cardstock
Heavy Glossy
Cardstock
Letterhead
Hole Punched
Colored
*1 The default for Size varies depending on region-specific factory default.
NOTE:
• For more information on supported paper sizes, see also
*1
Width(x)
Length(y)
*1
Width(x)
Length(y)
*
*
210 mm
148-215 mm
*
297 mm
210-355 mm
*
8.3 inches
5.8-8.5 inches
*
11.7 inches
8.3-14.0 inches
"Usable Print Media" on page
Using the Operator Panel Menus and Keypad
Specifies the width of the custom size
paper.
Specifies the length of the custom size
paper.
Specifies the width of the custom size
paper.
Specifies the length of the custom size
paper.
139.
335