Fuji Xerox DocuPrint CM405 df User Manual page 363

Regi Jam (Exit Sensor On JAM)
Problem
Regi jam (Exit Sensor On JAM)
occurs.
Exit Jam (Exit Sensor Off JAM)
Problem
Exit jam (Exit Sensor Off JAM)
occurs.
Action
Ensure that the drum cartridges are installed correctly.
If the problem persists, replace the drum cartridges if you have spare cartridges as
instructed in "Replacing the Drum Cartridges" on page
Replace the drum cartridges if you have spare cartridges.
See also:
• "Replacing the Drum Cartridges" on page 426
If the problem persists, ensure that the fusing unit is installed correctly.
Ensure that the fusing unit is installed correctly.
If the problem persists, replace the fusing unit as instructed in
Unit" on page 432.
Replace the fusing unit.
See also:
• "Replacing the Fusing Unit" on page 432
If the problem persists, ensure that the belt unit is installed correctly.
Ensure that the belt unit is installed correctly.
If the problem persists, replace the belt unit, the 2nd BTR, and the retard roller as
instructed in "Replacing the Belt Unit, the 2nd BTR, and the Retard Roller" on
page 435.
Replace the belt unit, the 2nd BTR, and the retard roller.
See also:
• "Replacing the Belt Unit, the 2nd BTR, and the Retard Roller" on page 435
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
Action
Ensure that the fusing unit is installed correctly.
If the problem persists, replace the fusing unit as instructed in
Unit" on page 432.
Replace the fusing unit.
See also:
• "Replacing the Fusing Unit" on page 432
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
426.
"Replacing the Fusing
"Replacing the Fusing
Troubleshooting
363