Using The Bypass Tray; Linking Trays - Fuji Xerox DocuPrint CM405 df User Manual

Using the Bypass Tray

• Load only one size and type of print media during a single print job.
• To achieve the best possible print quality, use only high-quality print media that is designed for use in laser
printer. For more guidelines on print media, see
• Do not add or remove print media when there is still print media in the bypass tray or when the printer is printing
from the bypass tray. This may result in a paper jam.
• Print media should be loaded with the recommended print side up and the top of the print media going into the
bypass tray first.
• Do not place objects on the bypass tray. Also, avoid pressing down or applying excessive force on it.
• The icons on the bypass tray show how to load the bypass tray with print media, and how to turn an envelope
for printing.

Linking Trays

When the optional 550 sheet feeder is installed on the printer, the printer automatically links the trays when you load
the same size and type of print media in them. The first tray will be utilized until the media runs out after which the
next tray will be used.
NOTE:
• The print media should be the same size and type in each tray.
• The bypass tray cannot be linked to any of the tray.
After loading the selected trays with the same size and type of print media, select the Type setting in the Tray
Settings menu for each tray.
To disable tray linking change the paper type in one of the trays to a unique value.
NOTE:
• If different types of print media of the same size are loaded in each tray, the printer will automatically link them if the paper
type is not specified in the print driver properties/preferences.
150
Printing Basics
"Print Media Usage Guidelines" on page 136.