Adjust Transfer Belt Unit; Adjust 2Nd Btr - Fuji Xerox DocuPrint CM405 df User Manual

• Adjust Transfer Belt Unit

Purpose:
To adjust the transfer bias when ghosting occur. (The ghost image may be the image of the previous page, or a part
of the page currently printing.)
Values:
K Offset 0
-5 to +5
YMC Offset 0
-5 to +5

• Adjust 2nd BTR

Purpose:
To specify the transfer roller voltage adjustment for each paper type.
The default settings may not give the best output on all paper types. If you see mottles on the print output, try to
increase the voltage. If you see white spots on the print output, try to decrease the voltage.
NOTE:
• The print quality changes depending on the setting values you select for this item.
Values:
Plain
Lightweight Cardstock
Heavyweight Cardstock 0
Light Glossy Cardstock 0
Heavy Glossy
Cardstock
Labels
Envelope
312
Using the Operator Panel Menus and Keypad
*
*
*
0
-5 to +10
*
0
-5 to +10
*
-5 to +10
*
-5 to +10
*
0
-5 to +10
*
0
-5 to +10
*
0
-5 to +10
If faint black colored ghosts appear, try to decrease the value.
If faint ghosts in color (yellow, magenta, or cyan) appear, try to
decrease the value.