Printing Custom Size Paper - Fuji Xerox DocuPrint CM405 df User Manual

Item
Image Options
Watermark
Printer Features
Summary
 Printing Custom Size Paper
This section explains how to print on custom size paper using the print driver.
The way to load custom size paper is the same as the one to load standard size paper.
NOTE:
• You can use custom size paper between the following ranges:
• For the standard 550 sheet tray and the optional 550 sheet feeder
- Width: 148 mm (5.83 inches) to 215.9 mm (8.5 inches)
- Length: 127 mm (5 inches) to 355.6 mm (14 inches)
• For the bypass tray
- Width: 76.2 mm (3 inches) to 215.9 mm (8.5 inches)
- Length: 210 mm (8.27 inches) to 355.6 mm (14 inches)
• XML Paper Specification (XPS) driver does not support custom size paper.
See also:
• "Loading Print Media in the Standard 550 Sheet Tray and the Optional 550 Sheet Feeder" on page 144
• "Loading Print Media in the Bypass Tray" on page 147
• "Setting Paper Sizes and Types" on page 151
Printing Options
• Output Color
• Image Quality
• Brightness
• Basic Features/Advanced Features
• Image Type
• Image Adjustment
• Screen
• Color Balance
• Defaults
• Watermark
– Edit
– Delete
– New
• Print on Page 1 only
• Defaults
• Feature Sets: General
– Gray Guaranteed
– Feed Orientation
– Paper Type
– Substitute Tray
– Custom Paper Auto Orientation
– Image Enhancement
– Draft Mode
– Skip Blank Pages
– Halftone Screen Lock
– High speed for monochrome documents
– Trapping
– Letterhead Duplex Mode
165
Printing Basics