Iwatsu Omega-Phone 924 Technical Manual page 62

Omega-Phone 924 Technical Manual
Local Area Code(s) (CID Feature)
MBC - 3-29
This Caller ID parameter must be programmed with any Area Code(s) that can be
dialed without a 1 as the first digit. These Area Code(s) identify numbers that will not
be dialed with the Long Distance Prefix.
• The local Area Code is programmed into Local Area Code 1.
• This identifies the number as a local number.
• This also causes the system to remove the Area Code from the digits
received.
• If the local Area Code received must be dialed to place a CID Call Back, the
local Area Code must be programmed into the Local Area Prefix 1 so that it is
dialed.
• Data Range: 5 digits maximum, 0 to 9, Null
• Factory Setting: Null
• Press show to get to sub fields
• Press chg to select.
• Press next to advance or back to return to the previous subfield.
SYS External Call Forward
MBC - 3-30
External Call Forward has three subfields:
• Active Line: Selects the that will be used for External Call Forward
• Service: This system-wide programming parameter determines the Service
Mode for which the External Calling feature will operate.
• Talk Time: This system-wide programming parameter determines how long
a user engaged in an External Forwarded connection will be able to talk on the
circuit before the call is disconnected.
Active Line
• Data Range: 01 - 09, Null
• Factory Setting: Null
Service
• Data Range: Always, Never, Day, Night
• Factory Setting: Always
Talk Time
• Data Range: 01 - 99 minutes
• Factory Setting: 05
• Press show to get to sub fields.
• Press chg to select.
• Press next to advance or back to return to the previous subfield.
58