Iwatsu Omega-Phone 924 Technical Manual page 105

Chapter 6
Automatic Selection (CO / Intercom)
Feature 95
This feature automatically selects a specific outside line or intercom (ICM) when the
handset or the speakerphone key is pressed.
A line will not be accessed automatically when a telephone is receiving an incoming
(outside or intercom) call or when a line is recalling at the telephone. However, the
automatic line selection feature may be overridden by pre-selecting an outgoing line,
or dialing an extension before lifting the handset, or pressing the speaker key.
Associated Features
Private Line CO Line Group
Ringing Line Priority
Conditions:
1. The system will not allow invalid directory numbers to be programmed during
setup.
2. An Extension must have CO Line Access to any CO Line or Line group trying to
be accessed.
Auxiliary Lamp LED Status Bar
Each Digital Key Telephone is equipped with dual colored LED's and an Auxiliary
Lamp/LED Status Bar to assist users in recognizing the extensions' status. The LED
will operate and indicate active CO line ringing, Intercom ringing, Mute, Message
Waiting, Speakerphone/Headset Mode and Call Forward conditions.
Conditions:
1. The lamp may have more than one indication flashing or steady at one time as fea-
tures are utilized in the system.
2. When "Extension Call Forward" is enabled, the Status Bar will be lit solid.
3. The LED status bar indicates several different functions such as Call Forward, Do
Not disturb, or line ringing.
Associated Programming
Extension
Line Assignment 1-LN-04
CO Line
CO Line Group 2-LN-07
Telephone Operations
101